Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Hello Sir,
I just finished star and messure volts, all are ok! :grin: Th
Yes next move, I'll remove thebox, clean and tight.
Thanks all for your help...
But here the big surprise.
I did not see ther first time this...and of course one of the screw of the first picture come here....and I suppose also this is the reson I have no voltage in L1.
I am very open to suggestion PLEASE!
Thanks to all!!!
I am going to upload to post more...Sorry again for my english.
As Mr. Ray 70 suggest, I was about to remove the swicht in order to clean, but I gave up for the front pin.../
Hello,
Some time today and incredible situation I found in side cubicule.
The first time I opened de cubicule, I notice one pice of cutted cable (wire?) at the bottom of it. I took some time I saw that circuit breaker was replace (please sorry for my english again!), because the wires were...
ello!
At last I worked this morning with our 002a.
a) I exercising the AC selector switch (with gen off) several times. Them I removed the side cover and I preferd not to loose the swicht, at the begining not to easy, a lot of wires to remove...need more time.
b) Started the unit, check...still...
Hello there,
I was looking for some help over all post ( titanic work) about my gen problem:
L1 is sending low voltage when I select 3 Ph on Reconnection Swicht, I did mesurement L1 and L0 aprox 60 volt. L2 and L0 110 volt (ok). L3 and L0 110 volt (ok). L1 and L2 less than 100 volt. L1 and L3...