Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
No, my mistake. I should have paid closer attention to what you were writing.
I think the cap with the tube on it probably keeps rain water out better. I pulled my low profile square top cap off recently and found traces of water in the reservoir. I suspect it got in there through the two...
Ok, looks like I'm chasing the wrong issue here. Looks like you have the right master cylinder, and are looking for the other cap? I never got one of the vented type, and just stuck with what it came with from Croft.
Sent from my SM-G920V using Tapatalk
It's been a while since I researched all this, but as I recall, there is another similar master cylinder with the same hold spacing that *fits* but the reservoir sticks up higher, and the pressure port sits lower. This necessitates grinding the back plate on the housing in order to give...
I think this is the master cylinder I used:
https://www.crofttrailer.com/10614-hydro-act-actuator-master-cylinder/
It's lower profile like the original.
Sent from my SM-G920V using Tapatalk