Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Fantastic, thank you!
The Napa ST-85 has the same specs as the one from Ebay so I thought it would be ok.
I'll try to cancel that order and order this instead:
Trombetta 974-1215-011-09
(There is also Trombetta 974-1215-010-09 which is the standard and does not have dust and liquid seal)
I found a: ST85 Continuous Duty Solenoid Starter Switch FOR 12 Volt Systems 80 amp (Made in Mexico) on ebay for $20 with free shipping so I ordered that. Is there a way to test it with a multimeter before installing it to be sure its good and correct, or is that not needed?
Just got back in town from a long weekend, so sorry for the slow reply.
It would not start. The starter worked fine and the engine was cranking.
Thanks for the part number and advice:-D!
You nailed it! The relay did not light the test light from the bottom stud. Thanks for the advise :-D. Is that a part that can be removed and cleaned, or should it just be replaced?
I see your point regarding the modifications. I bought this truck to learn basic auto mechanics, and I'm...
Most times the wait light and glow plugs work flawlessly. A couple of times this week the wait light stayed on over a minute and when I turned the key the engine did not start. I tried a again and it took about a minute for the light to go off and the engine still would not turn over. Third...