Search results

Inside pic of the 806. Reset in 2012 Sent from my Pixel 3 XL using Tapatalk

Quad mwo Hello folks. Both machines have the large bus fuse. The fuse was missing on the 806 when I did my start up on it. I put one in from another 806 I have. Machine powered the building during start up and blew. With a good fuse it only makes power when start switch held to far clockwise...

Maybe on the percentage. The machine only had 4 hours on it. Wanted her to brake in smooth. I have had luck with sea foam on 600-700 hour machines cleaning up. This one had a new Melton unit, looked brand new... Sent from my Pixel 3 XL using Tapatalk

On the 8004 I have run 20 gallons of fuel with sea foam. No luck Sent from my Pixel 3 XL using Tapatalk

Thanks guys for the follow up. All the generators I have purchase have been completely empty, bone dry. New oil and fuel filters and fluids, even though it felt like I was thinking new stuff out. Sourced everything from Napa and used rotella t. Once filled I ran them to reach temps and circulate...

The 806 I start normally, hold the switch until I get oil pressure and see the dials indicate power. 5 seconds maybe to the release run position. That's when I notice upon releasing the switch that the power dropped off. While still running if I turn clock wise to the start position again the...

I had the 804 under a full load for a short period a couple months ago ran clean did a work in the shop. Week later started ok, then started missing when I put under a load, 40% I think it started chugging. Lots of black smoke. Sent from my Pixel 3 XL using Tapatalk

The specs. 2002 Fremont mep-804a nsn 6115013199033. The other is a 1995 Libby Corp meo-806a skid unit. Both machines are full reset under 20 hours each. I think they're unit was decommissioned and just sat around for years. Sent from my Pixel 3 XL using Tapatalk

Thanks folks for the assistance. When I got the 804 it ran poorly. I found a dry rotted split fuel line. I replace and primed the system. Ran well with some sporadic short term chugging for an hour or so while I had the coolant circulate. I had it connected to a small load, several lights on in...

I am located in the mid Hudson valley, I own several military generators. I am looking for a technician. I have a mep806 that makes power while the start/run switch is turned all the way clock wise. Once released to the run spot it no longer makes power. 2nd I have a Mep804 that seams to have a...