Search results

I would bet those wires are fine if the insulation’s still intact. Also wires don’t usually overload and burn in the center of the length of wire. They will overload at the connection first, then work it’s way to the center. the way your wires look is like it was from something touching them...

Are they brittle? Does that part of the wire feel different than the rest? It should be obvious if the wires are damaged in person. these pictures make it hard to tell if it’s just dirty wire or burnt. Burnt wires are not normal!!!!!

If you have concerns about Reliability, I would have two good running units that you went through. That way you know you have every part possible for a repair or just a set change the chances of both quitting on you would be almost none in my experience. These units are very reliable when...

Dang brother those pressures are normal. These units are made to not run at a constant temp. The temp changes with load 180 no load and almost 210 full load and when your temp changes oil gets thinner. Oil pressure is in the thirty’s without load and as low as what can look like under 25 psi on...

All three of my 803A’s have under 200 hours on the motor and will run in the 20’s when a loads on them.