Search results

My 003 with 3 of the 4 bad didnt vibrate too bad. the spacer is rubber coated .

until all #17s delaminate, and all #19s fall upon all #20s then it looks alrght, just 9/16 inch shorter

maybe this will help

Yep, Many ways to fix this.

Measured at .8765 inch. The spacer is longer but the motor mounts are conical in the inside, so the bushing is much shorter than the spacer. OD dimensions of the spacer may vary as it is coated in rubber.

It can work, the only problem that my have is getting the spacer pressed into the tubing. at 7/8 inch the spacer was still a tight fit. More than one way to defur this particular feline.

Yea. I spent hours searching, drilling the ID out wasnt too horrible to do. Slow cut speed and a drill press make it easy. Sent from my SM-G973U using Tapatalk

I found some rubber bushings, 2 inch OD x 1 inch thick. the down side was the hole was only 1/2 inch. I had to drill the hole out to 7/8 inch (an electricians 1/2 inch holesaw works well). Press the spacer into the bushing and reassemble. It took me about an hour to rebuild all 4 mounts(the...

Is anyone else having problems with the motor mounts/engine supports failing? My 003 6 of the 8 rubber bushings have delaminated to the point where the inner bushing was taking the load. after several days of searching online, i only found 2 sets in the bay of E and they were more than I was...