• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. K

    MEP-803A overheat - newer issue

    Thank you for the info. I want to make sure that the pump has enough lifting ability to be able to draw fuel from the tank. The inlet for the tank is at the top with a pipe going to the bottom to draw from. Thankfully, the water pump replacement appears to have solved my overheating issue...
  2. K

    MEP-803A overheat - newer issue

    Thank you for the info. I want to make sure that the pump has enough lifting ability to be able to draw fuel from the tank. The inlet for the tank is at the top with a pipe going to the bottom to draw from. Thankfully, the water pump replacement appears to have solved my overheating issue...
  3. K

    MEP-803A overheat - newer issue

    I think you are 100% correct here. Yesterday I tried an experiment.... Remember, I am working on an island so I have limited resources. I have a 30 gallon barrel that I was using as a auxiliary fuel tank. It was plumbed directly into the primary fuel pump since the aux adapter and aux fuel...
  4. K

    MEP-803A overheat - newer issue

    Yes to all. I just put a new water pump on it this week. Now I have a new issue - the unit bogs down under load and dies. No warning lights or anything. Prime pump still ticking away... I replaced the fuel filters recently (when I had the over heat issue) and now wonder if I also have a...
  5. K

    MEP-803A overheat - newer issue

    Yes. Overtemp light. Hot spewing radiator fluid everywhere. No coolant in the oil. I do have a head gasket leak detector I could bring over. Unfortunately, getting time to work on the darn thing is a PITA. I went ahead and bought a water pump. I figure for $150 I could at least eliminate...
  6. K

    MEP-803A overheat - newer issue

    Okay... I'm back again... Had a chance to finally spend some time working on the unit. Flushed the radiator again. Filled the radiator and burped it several times. Filled the engine oil. Replaced the radiator shroud. Replaced the thermostat. The unit runs like a top while unloaded. When...
  7. K

    MEP-803A overheat - newer issue

    Pulled, flushed, did not reinstall t stat and then new coolant and it overheated.
  8. K

    MEP-803A overheat - newer issue

    The hoses did feel like there were springs in it. The coolant was hot and boiling. Not bubbling like it was pressurized. The black liquid was from the radiator flush. I drained the radiator and filled it with water and the solution per the directions. Ran it for the required time with no...
  9. K

    MEP-803A overheat - newer issue

    Forgot to mention that I pulled the thermostat out too. It was absolutely an overheat as the coolant was bubbling out all over.
  10. K

    MEP-803A overheat - newer issue

    I appears that I post about every 6 months or so, after I have been to my place in the islands and had to fight with the generator. This time is no different. Finally got back to the islands over the past weekend. Ran the generator for a bit without a load and put in some radiator flush. After...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks