Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Not trying to be smart But ; If the truck won't move at all, have you checked to make sure the transfer case is in gear. Look under the truck (safely) see if the drive shafts are moving, bad transfer case/ broken diff or missing- broken half shaft could all cause it not to move. May have...
No the trans would go into gear and shift even though the light stayed on / I noticed the torque converter was locked up all the time and I don't believe it would go into overdrive but I didn't drive it much until I was able to sort it out. Will your truck not Move ? not even in limp mode ?
My M1123 did the same thing, Light came on as soon as the unit was switched on but when the engine started it stayed on. On mine it was the RPM signal from the engine telling the TCU the engine was running. I was lucky in that the plugs had been pulled apart at the sender.
Good Luck.
(edit)...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!