Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
A couple more update on the rear most passenger axle. Check out the worn out rubber on the old wheel cylinder! New shoes and brake wheel cylinder. Cleaned it up quite a bit too!
Have not had any issues with brakes sticking since that occurred. I think the brakes were out of spec then. After that tragedy with the fire I replaced the wheel cylinder, all seals, brand new brake shoes and cleaned everything to the best of my ability along with properly adjusting the brakes...
Definitely go for it! Safety First! jackstand came later placed in both front and rear of leafspring 12ton jackstand. You can see in the picture with zipperboot on bumper.
Today I regreased the front under the old torn zipper boot, replaced the zipper boot, and adjusted passenger front brakes. Those boots sure get slippery, however it went easier than I thought it would lol!
For this recovery with the Ryder truck it was a solo mission, so I did not use the winch. Being that the winch is much easier with two people. I used two 4" x 20' straps on the front shackles attached to the frame of the box truck one on each side of frame rail. I dug out the wheel that was in...
Installed a middle seat belt for the middle seat, also installed some tweeters for the radio. Got a phone mount so my phone can be mounted somewhere instead of bouncing around on my lap!
Busy day today! Big Mike's brake light air switch and kit came in yesterday and got it installed today. Now my lights work correctly. I had one burnt out bulb luckily I had a spare from another set of lights Jeffrey the previous owner Included.
Also had an off road recovery that our normal...
Have not yet inspected the master, but did do a few nice things! Installed a new brake switch hydraulic one, and now the brake lights stay on! Ughhhh. Any ideas there? There were off on install then I pressed brakes and they stayed on.
Ordered the air side brake light upgrade kit from Big...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!