Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
So the thermal switch has power when I jump the thermal switch the truck starts right up
there’s jumper wires everywhere lol
I removed the jumper wires from the switch in the cab and hooked it back up too the button with the thermal switch jumped it starts right up
the only thing is I never...
So I wired the push button open and am getting 24 too the top and bottom of the aux relay on the frame when it’s off there’s no voltage too the top or bottom
I have load tested the batteries and there on the charger now so I don’t drain them as I’m working on it I looked at the lpbd again last night and it looks clean with no issues checked too see everything was tight back there also
i have power getting through cb21 i have not gotten power over at the frequency box yet I’ve checked my meters against each other and there working correctly on a constant
Ok I have removed the kick panel both the red 10 amp fuses are good I’m not sure I swapped around the relays with no change to k1 not sure where too go from here really
Do you guys think I need too pull the fuse panel out and check the back of it too check the connections I am completely out of ides and about too take a bath with a toaster lol 😂
thanks for all your help
It’s 72degs inside my shop lol and I tried jumping the switch all read was the first thing I did when I do that or press the switch nothing happens at all no noise no clicks nothing
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!