Search results

Yes, correct. The winches are the same and will bolt up to either extension set up.

The M939-series and the M809-series frame extensions are different. They are not interchangeable as delivered. I have not done it, but there may be a possibility they can be modified. These are the M809 specific extensions and brackets (w/ part numbers) you need to mount up the 20K winch.

This is the pump part number: 26VQ14A-1C-20. The spec sheet is attached. See page 15 for this pump's specs.

It is the pump designated for the 20K winch. It mounts (on an M939-series truck) inside the frame rail on a 90-degree bracket (I have this also). According to the spec sheet I have, it makes 14GPM at 1200rpm/100psi (I can attach spec sheet later). It is PTO driven. It only requires a filter (I...

No, that I don’t have.

As mentioned before, the hurdle is adapting the hydraulic motor mounting to clear the front crossmember. I was going to do the mod after a transmission upgrade. I later decided not to and stick with the mechanical drive. I do have the pump, pump bracket, and the frame mounted oil tank. I also...