• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. m-35tom

    Transmission swap, what to have on hand ahead of time?

    do not use just any grease on the pilot bearing as it will not lube properly. use grease that is 3% molybdenum sulfide, even if the manual does not call for this, it is much better than what they had 50 years ago.
  2. m-35tom

    Transmission swap, what to have on hand ahead of time?

    rear seal, no bolts, pry old seal out, should have three 1/4" holes on bottom to aid in oil drainage. press in new seal. flywheel only goes on in one position due to balancing, cut the head off a 3" bolt of the propper thread and screw it into one hole to aid in putting flywheel back on.
  3. m-35tom

    Transmission swap, what to have on hand ahead of time?

    no need to remove front drive shaft unless you have a winch, then it will help. fill trans before you put it in, it holds 5 qts. if you are going to attack the clutch you will want an old input shaft to use as alignment tool, it has to be almost perfect to just slide in, otherwise it will be...
108,849members
164,009threads
2,307,564posts
691online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks