Search results

I have bought some off eBay just used the numbers off the old parts I think I bought some diodes and resistors. If not there try the website digikey.com I ordered some back up from them also. There is a store called Green Mountain parts, and also another WB parts. If you find a great place to...

I would definitely follow what GuyFang has to offer. He is the one the walked me through everything down to the T.. I still don’t have my unit running right yet I got all the crazy problems fixed and now back to square one I think with what was probably the original issue that has something to...

I just put the one 50 on it and it runs with voltage now and the outlet works on unit with a fan running. So I need to get the 2 of the 7.5 and stack them on back side like it was? I’ll send pictures

I have finally got back to my project that I laid down to chase other things and got my parts ordered and now that the hurricane season is in full swing went back to put the resistor on that I bought from the web site and realized that R14 has 3 of them stacked on top of each other 2 of them...

Ok thank you very much for all your help. Not sure how to make it worth your time but just thank you seems cheap! Yes I’m becoming aware that I probably got lied to or previous owner has dementia because there are becoming a lot of little things that look like somone been tinkering and didn’t...

Not trying to beat a dead horse and keep asking same questions but do you know of anyone in North West Florida that is a mechanic like yourself just in case I need some help in future

Also before I forget would this R14 resistor have been something that could have blown because of overspeed

Ok thanks and will be standing by for the information

Ok thanks! I haven’t googled it yet but is that something I can order online or where is the best place to order parts from? I also notice my batteries are being drained down would this at all have anything to do with the R14 ? Thank you very much for your time and support and will support page...

With dead switch off and AC Reg wires 1&3 off they oms out at 32. With wires 1&3 still off and machine running and S1 switch held to start.. R14- Leftpost 24v / Rightpost .2v CR2- Leftpost 0v / Rightpost .2v

Will do and report this afternoon

R14 left terminal- 24volts R14 right Termnial- .4 volts CR2 left terminal- .4volts CR2 right terminal- .4volts machine was running and was holding switch to start while checking post in DC I’ll send picture of post I was checking and called them left and right because unsure of which one is 1or2

Will do and report

I do not get any reading of any AC except 11volts at the outlets with the unit running and switch held on start. I tried the battle short switch to see if anything happened but nothing. I’ve held reset button with machine off and while on.

And to answer the DC volt amp gauge aka battery charger gauge once I fixed switch wires my gauge shows it’s charging not discharging

Good afternoon Sorry for the 2 threads I’m new to posting on forums. Yes at this time you can delete the other thread I have fixed my issues with the S1 switch after I was about to take switch apart I began looking at a diagram of wires and realized it was totally wired wrong which caused the...

This is the manual I’m using in attach pictures

I will double check which manual I was using but was attempting to follow the steps it had me starting out checking the Governor control unit which I think is A5 which if I did right had juice to 1,3,5 while until was running but wasn’t sure if I was supposed to have a relay so it wouldn’t crank...

Afternoon I’m new here and just bought this Gen. It was supposed to be ready to go after all fluids changed it had not run in 2 years supposedly. I posted earlier this morning because I could not figure out why my Master switch would not crank on the normal setting and would crank in the Aux...