• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. J

    MEP-80XA fuel solenoid

    Made a mistake on how the k16 relay works. Power comes in on k16-4 from the k2 cranking relay. After I figured that out I tested continuity from tb4-6 where the k2 feeds and did not have continuity between the 2. So I took off J6 plug and found the issue. Look at number 36 plug. I cleaned it up...
  2. J

    MEP-80XA fuel solenoid

    Yes i did that too. I was thinking maybe the connector broke inside the housing but it had continuity between all the terminals and related connectors for the relay.
  3. J

    MEP-80XA fuel solenoid

    To start, I just got a 803a in that had the gen head and engine recently replaced. The top panels were removed when I picked it up. My problem is the fuel cutoff solenoid is not getting 24v to retract. It is getting 24v on the hold signal so I can turn s1 to prime/run and pull the solenoid back...
108,849members
164,009threads
2,307,563posts
746online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks