Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Double check the connectors (as previously mentioned). If that is good, I believe the wait light goes to ground (this is from memory so DEFINITELY verify in the wiring diagram!). If your grounds in the dash area are damaged or iffy that could be a problem. There is a grounding screw to the...
Good luck!
If you do end up removing the heads, definitely have them inspected by a machine shop. It's worth it.
There will probably be cracks in the pre-combusion cup bottoms, but don't worry! There are some standard measurements you can use to determine if it's OK or if they need to be...
If you can turn the glow plug, and just can't fit the tool you have in there.. Then you need a different extractor. Look up "OTC 6005A Glow Plug Remover Tool Set". This is what I used on a counterfit set of glow plugs to get them out. You need to be careful not to break the half-moons that...