Search results

http://www.kanolabs.com/

If the air cylinder is extending and the VS portion of the ip gov. is in place and working the engine should steady at 1200 1250 rpm. Madsam's right, unless u want to disassemble the cranks just take your time and soak, wiggle, tap,and soak somemore. I use KROIL, it works a lot better than PB...

Joe , Here is a pic of the valve in question. It's attached to the front of the power divider and is actuated when you engage the crane drive, the lever on the rear deck, in front of the rear winch. When the crane drive is engaged the valve supplies air to the air cylinder which, then, actuates...

Joe, The one they sent me was not original. Its larger in diameter and sealed, with larger connections on each end. Instead of jacking around trying to make the newer one fit, I used one from a M543. It's the same bot a little shorter.

Crash, You have the correct IP. The rear throttle is a bear, it's just a steel spring 20 some feet long with a steel wire going thru it. Can you spell RUST. I tried to repair mine and ended up throwing it away. Got a new one from Saturn, but didn't use it it was somewhat different. I've started...