Search results

Hey thanks great, I got my tech info from NG unit but would love to have TM. They said to put it in 2nd but after using you can use either if mico switch on shifter arm is set to engage.

How long do you hold your PB switch in before you try to crank it? (I hold down 10 secs) If it don't start & run after about 5-10 secs. of cranking, something is wrong. I would hold PB down again for about 1/2 the time you did on 1st try. If it don't run then, you need to look in other areas. To...

Yea, it could be fuel, but usually diesel will last a time. I had problem with 1 M1008 that it was hard to start and would run 3-4 min or maybe 5-10 then cut off. Had air in fuel lines. After cking many things, finally had to drop fuel tank and found out that the sock on end of pickup in tank...

Yes, it is the gov switch, I had two of these and the one my son & I fixed up & drive has the switch panel missing in the dash. He figured out the wiring and put a flip switch next to the electrical panel board. So after we engage pto & put in 2nd or D, we go back to panel & flip the gov switch...

1) Do NOT start engine yet. 2)Put your 205 transfer in "N" Neutral ONLY 3) Engage your PTO by pulling all the way out the Large Blue Knob next to the black out lights 4) Start your engine and if its cold , let it idle until the Hi-Idle cuts off and engine idles normal. 5) Pull your...