Search results

Another way to end up a gallon or so overfull is to not drain both sumps on the oil pan, and then dump in the full 6 gallons. -Chuck

Cool! I would bet that the PMCS depot has a huge tank full of 15W40 oil with an electric pump on it. Someone probably wasn't paying attention to the meter on the pump. -Chuck

One thing to note: the deuce will only read FULL on the dipstick at 60 seconds after shutting down the engine... After 6 or more hours, when all the oil has returned to the oil pan, it is supposed to read 1-1/4 inches above the FULL mark. -Chuck

You could just bypass the FDC and hope for the best, or you could test it. The FDC unbolts from the injection pump with 4 screws. Remove the screws, and lift the FDC out of the IP. With all of the fuel lines connected, turn on the accessory switch so that the in tank fuel pump starts...