Search results

Gimp that's one hot lamp! Do your belts! The rad isn't as rough as it looks once you do it. Make sure you put the lower hose on first before you put the rad back on. Can anyone give advice on working on a M923A2? LOL!

Upper hose is 2". The water intake manifold are 1 5/8 ID, I think... correct me if I am wrong. I had a rough time getting them.

The locking bolts on the compressor pulley ARE on alternate sides!

Best way to install the lower hose is to do while the radiator is off. You can get your hand up in there to ensure it's on the block all the way. Then put the radiator back in but let the two bottom studs rest on the plate, don't put them in the holes yet. The put on the other end to radiator...

You are right. The NAPA # is 7759, I had the gates cross reference 7372. 8 or 9 gallons of Coolant! You must have one of those hard to find special motors-- ldt 465 1D-SC "SC" for Super Cool! LOL. Should have been 32 quarts. Remove fan first. If you have a winch, use a piece of...

Putting a new lower hose (NAPA 7372 cut 1 inch on each end) on is easier with the radiator off. Put the end to the block first then put the radiator back in and connect the other end. But while you have the radiator out, Get that compressor pulley loose. Spray PB Blaster and let sit. If it...