Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
From the cat service manual. The clutch starts to engage at approximately 775 rpm and is fully ingaged at approximately 1100rpm. The slection of a correct gear ratio must be made to pervent a long period of time in the 775 to 1100rpm range. If the truck does not accelerate ( pick up ground...
Right don't down shift and just let the truck coast to the stop then lift handle and place in you starting gear. I can start on a flat no load in 5 or 6th. Just when starting if the speed does not pickup in 3 seconds you chose to high of a gear smack it down one and try to get it going again...
Im not going to rake you over the coal's but yes this is a trans. you must drive.
Drive it more and you will get the feel for what gears you can wind out to 2100 and one you can shift at 1850. I only use 7 gears on mine from stop to start empty.
They like to be really warmed up to shift a little...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!