Search results

Yes got your pm :wink: But first I would like to fix mine if possible, very understandeble I think. But you are right too and thats why ask this on the board. I will think about it. Thanks, Corné

Hi guys Can I easely take the hydraulic head off?? I think its only 4 bolts in the corners right?? Do I need to be carefull, I have no idea what happens when I take it off. Corné

Hi guys I will start with the bad news first :cry: During the compressiontest, I saw that one of the injectorfuellines was squirting some fuel, but not under high pressure like the other 5 did. I suspect something in the pump is not working like it should Good news is that the compression...

Thanks I will take a look at those pages. Corné

Any ideas left here on the board?? Well I was thinking of a compressiontest, how much compression should it have? About the fuel injector pump are these for sale or rebuildable and where to get parts?? Here in the Netherlands rebuild pumps cost 2500 euros and sometimes they have takeouts for...

Hi I cleaned all fuellines with compressed air and diesel, but no dirt came out the lines. Also took the fuelpump out again and cleaned it with compressed air, although it was clean but just a double check. Ive also refilled the tank with new diesel, maybe it had some old diesel in the tank...

I forgot to say, but I cleaned the tank before and the strainer was clean. The fuelpump looked brandnew. Ive also drained the tank and found no water. But Iam going further with the small things. Thanks, Corné

I hope some remember my previous posts about this subject. Well I have cleaned all filterhousings and installed new filters and there was a small difference. Last time it started running badly (sounds like its running at 5 cilinders) at around 1500rpms and knew around 1800rpms after the...