Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
yes. you could try a single link from the existing lower bracket, but i think you would be much better off moving the axle bracket to below the housing some.
put the link into tension/compression versus the moment arm as it is now; keep what you have, but run a link from the lower bracket to the cross member bracket. this will change your rear to mimic a 3-link (essentially 4) setup. the effectiveness depends on the amount of seperation between the...
mine are fabricated plate blocks from Red Barn Customs - they are bracketed to encapsulate the axle housing and are welded on.
i'm not sue if they are tapered. that's actually something that i need to look at in the near future; i've got a vibration at 2500+ driveshaft speed that i'm...
no bind. zero axle wrap.
the thicker 'handles' are on the M109 vans, which is what my truck was originally. they are supposedly intended as tie-downs, although the thinner 'handles' on the M35 have me wondering if they are of any real use - isn't much meat to those...