Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
IIRC, the aluminum intake for a humvee and a cucv type setup are very similar. Only difference is the cucv has a divider in the manifold. Should work though.
That area has a tendency to dry rot. As long as it is not cracked into the filtered air, it should be fine.
Each bolt requires a flat washer and a rubber washer (for vibration). If you do not install the rubber washer, the air horn will crack with time.
Get a 5/16 grommet and cut in half crossways.
12 is the flat washer
11 is rubber washer
Assuming: 6.2/6.5 NA in hmmwv.
MS90725-47 BOLT,MACHINE 5/16-18 x 3.75 X ..........................2 Required
don't forget you need rubber insulator for each bolt and washers.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!