Search results

I got a Wagner 4860 headlamp from ATR Lighting for $19.25 and soldered my burned out bulbs leads on to the new bulb. Works great!

M35A3, Then the low beam blew to while I started it in the shop. It's a Wagner. Wiring is good an tight and secure. There is some flex in the bucket. So I'm back to the drawing board. Anybody have luck with the LED's? Speaking of which, I put bayonet type LED in the shift tower and it works...

I started her up ( M35A3 ) and backed out of the shop to warm up. Noticed the left low beam headlight out. This about the fourth one I've gone thru in ten years. Is this a common problem? I'm thinking about LED's but they sure are spendy.

My fuel gauge was bouncing all over the place when I get 1/2 tank or less. I pulled the sender and ohm'd it per the manual and found it out of spec so a new one is one the way. Hope that solves the problem.

Installed an MAR 120A Alternator Noise Filter on my M35A3 w/ Vic1 & RT-246. Found on ebay for $65. Easy install, works great, no more whining!!

​ I added some storage space to the front bumper area. Bought a extra set of hydraulic tank brackets, ground off the offset spacer and flipped them around to the right side of the frame. Then added a couple of aftermarket spare fuel can carriers to hold fuel cans or large chocks for winching.