Search results

Thanks Guys, It sounds very likely I do have a pinch. The trouble is I cant remove the bed so I think I will try to pull my steel lines back far enough so my rubber lines connect on the inside of the frame so I can connect them with the tank in place. I wonder how hard it is to jack up the bed...

A pinch in the return line is a possibly, because I couldn't touch the top of the tank to connect the lines so I put longer ones in. Is there a way to check this at the IP without dropping the tank? I may just drop the tank anyway but its got 10 gallons of fuel in it now, so it's more fun...

I am using the bleed on top of the filter. Seeing a good flow of fuel there made me think the pump was working well and didn't have any kinks in the line from there back to the tank. It acts like its not getting enough fuel. It does run smooth for about 2 seconds before it starts missing and...

I bought a M1008 with the fuel tank already removed because of a hole. I replaced the tank today and tried to start the engine for the 1st time. It runs only a few seconds then dies. I first thought that air was the problem, I bled the fuel filter and plenty of fuel flows out the drain while...