Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
To answer my own question: pushed in the rollers to make flush with the round case. Then I filed it with a needle file to remove any burrs and such. Made sure the pin fit in before putting the bushing in the transmission. A good piece of advice is to mark the location of the holes on the top of...
I tried to tackle this project today. Everything went ok until I tried to get the new sleeves in. SEEnebraska mentioned an interference fit.
So I’m wondering how he’s overcome this interference fit. Someone else mentioned the pins ‘walked out ‘ and he used vice grips to push them back in. Are...
About to tackle the shifter bushing.
Are there any updated hints on how to get the collar off? I’m considering using a large wrench (large enough to get around the shifter) and a pry bar to push down on it and put tension on the spring. I bought some 16” channel pliers. I hope I won’t have to...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!