-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
Truck Starts Crappy after replacing Flame heater
Yep. And I'll research it further to see the distribution of the lines. So I'm guessing the HH is different from the IP, and somewhere between the in tank fuel pump and the HH, air might be getting in, and when that happens, we need to build up the pressure to displace the air with fuel over... -
Truck Starts Crappy after replacing Flame heater
I was wondering if you could elaborate on this one further. Reason: I went to look at a M35A2 w/w that I am considering buying. Everything looked fine but brake leaks around two wheels, but he said he completely went through the brakes and flushed them all out as well, then put in new DOT5... -
Truck Starts Crappy after replacing Flame heater
You can twist that plastic fuel line when tightening it. You need to turn both ends at the same time, so you don't turn just one end when tightening, let the compression fitting bite, then put a twist in the whole line as it is tightened. Once you get a twist in it, it can, and often will...