• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 7

    m35 master cylinder compensation port

    lol don't feel bad I am 57 and somehow have developed insomnia it's not to bad until I wake up my wife with the air compressor or start grinding steel and then there's trouble my truck is a 71 m35a2 it has one airpack and is the short style and it was rebuilt by me and it was before I joined SS...
  2. 7

    m35 master cylinder compensation port

    yes I did ,royal brass and hose made them for me they are a half an hour from me but seems to me that the hoses are pretty far downstream from the master cylinder but they have been changed incidentally the right rear wheel cylinder would make a slight hum when I backed up after I did my brakes...
  3. 7

    m35 master cylinder compensation port

    Thank You !!
  4. 7

    m35 master cylinder compensation port

    not sure if these went through, first pic is a parade I was asked to attend, and it was an honor!!! this shouldn't have happened guys, but I don't want to get into that and get kicked off my second day
  5. 7

    m35 master cylinder compensation port

    Thank you ,I will send some pics as soon as I can ,my brakes are fine they have always worked fine but little things bug me on my truck that's why my screen name is what it is , a 7 ton Swiss watch !!
  6. 7

    m35 master cylinder compensation port

    thank you guys when I drill that out tomorrow I'm going to go back into my airpack and try to fix that lip seal in the small piston ,the air side is leaking again and it's forcing brake fluid through the slobber tube I changed over the vent that was originally plumbed with the fuel tank and...
  7. 7

    m35 master cylinder compensation port

    thanks guys !I'm nowhere near .70mm I have a welding tip cleaner set and I can barely fit the 3rd size up from the smallest one through there and I ground down a rat tale file so thin (smaller than a straight pen) that i'm afraid of it breaking off in there ,i'm going to take it off and drill it...
  8. 7

    m35 master cylinder compensation port

    cucvmule I've owned it 5 years and drive it almost daily in my business
  9. 7

    m35 master cylinder compensation port

    I didn't want to plug anything I just was wondering if I can drill out the tiny hole inside the master cylinder to a slightly larger size ,I believe it's the compensating port mine may have too small an opening because it takes the 3rd smallest welding tip cleaner to clean it out ,I rebuilt...
  10. 7

    m35 master cylinder compensation port

    new member here ,question the small hole in my master cylinder stops up about once in a couple of months I clean it out with a ground down rat tail file but it keeps doing it can I remove it and drill it out or would it kill it ,I rebuilt it when I redid my brakes and have put mil spec dot 5 in...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks