Search results

Ugh! I should have. Not sure why I didn't think about that. I saw it sitting there when I picked my platform up from you. Silly rabbit, Trix are for kids.

I ended up buying everything I needed vs making, since I needed to purchase all the UPA's, support arm, etc, anyway.

The triangular "weapons tray" on my LWS ring is not like the Humvee one, so I am told. Mine is symmetric on both legs (same length), and looks to not require what is called a "bearing sleeve", which is a tube with 4 square headed set screws in it. A bearing sleeve looks to be typically...

Interesting, thanks. Besides being a mirror image, it seems the dimensions are slightly different. Wonder if that is something somebody made for themselves (their own design and dimensions), or if mine is way off. I was at Findlay this past weekend, and was told by a guy walking around that...

My writing sucks, but here is what I came up with. The bend angle and length of that bent fin are going to be off, and much longer than the 4.6” estimated. The rest may be reasonably close (?). The rectangular mounting bolt pattern seems to be about 2.33” x 5.88”, approximately. Start with a...

Thanks, take one of your kids protractors too! Also, I just copied the closer up picture into the "Paint" program under Windows Accessories. I remember that program having an X-Y coordinate display at the bottom edge for the cursor, so using the close up pic and the known cross tube diameter...

I'm going to try and have our CAD guy at work scale the dimensionals from wsu's 2-D frontal pic tomorrow, given the windshield total width as reference off my truck, if he has a pinch of free time. That should be close enough to do what I want. Angle will likely just have to be an educated...

Yep. I’m not a CAD guy, so would take me hours vs somebody else minites, who is used to working with such. Offer stands for actual measurements of real plate. Email: detroitdiesel671@hotmail.com include your PayPal address.

$40 offer for dimensionals to replicate, including bend angle.

I don't think anybody that sell or makes/sells them is going to give me dimensions. Thanks wsu. From your frontal pic, I should be able to scale it, simply using one of the windshield frames as a known reference (measure mine). I don't know the bend angle, and it will be harder to gauge the...

Don’t need blueprint level, just approximate of each flat face, the “U” cut out and position, and the bend angle. Example:

Anybody have the LWS (chicken) shield dimensions and approximate bend angle? Looking to make one vs pay $900. Thanks.