Search results

Or just take the bench seat off. That door removes much easier by raising up the back end and sliding the flap oyt from the wall. But your bench seat is in the way of that. All of this is part of the reason I try to keep my stuff AMGeneral parts.

Yup, he can access the relay to reset it the same way he has to get to the TCM.

In your picture, that big panel you are trying to lift up is actually the rear seat back that is laid down to create part of the bed. It fits into notches on the side and at the rear. You already pulled it out of those. The front of that panel is hooked to the body just behind the driver...

are you talking about the door or the piece of the bed? You can PM me your number if you want me to send a couple pics for you tomorrow morning. Ah, I see that you want the seat back lifted up.. it may be easier to remove the rear door panel and access the TCM from the side. That rear...

Do you mean the fake door (filler panel)? 4 bolts at front and one turn button (dzus) in the top of the fender. The steel wire at the top rear should be holding the fastener to the fender. if that is too tight, put a screwdriver thru the loop and turn it counterclockwise. If it doesn't have...

with an overdrive, 1st is good for up to 27 mph 2nd to 45 mph D to 55 according to your pics, are you saying that you put the selector in ! and drive 45? Why would you do that? Maybe the linkage is not adjusted properly and you are actually in 2nd.

autozone doesn't sell humvee only parts. all models have the same filter and water separator, AFAIK.