Search results

Yes, I can do this when I get home tonight. Thanks,

It was wired like this since there are 2 units on a M1102 trailer with transfer switch. As far as I know, if the unit configures as 120V 1PH, only L3 / N will be used. There should not have any power on terminal L1 or L2. I just measure power between L3 and N.

Yes, I used the clamp. I got the same result when I used multimeter between L3 / N. The GenSet also connects to a transfer switch since there are 2 units on a trailer. There is no light indicator on the transfer switch neither. The second unit has a light on at the transfer switch when I...

Are you sure about that? If you look at the first picture at the bottom, 120V - L3, N and it matches with second picture at 5 o'clock. I am not an expert but I will try it anyway. Thanks,

This is what I setup. https://www.youtube.com/watch?v=6lt0R_Dns9s&feature=em-upload_owner#action=share

You're right. It is 5 o'clock position. I will test it when I get home tonight. Thanks,

My MEP-802A has power at the convenient outlets. However, it has no power at the terminals. The unit sets as 120V 1PH at DC CONTROL POWER circuit breaker. Frequency sets at 60MHz.at Frequency Adjust Control. VM-AM transfer switch sets at 3 O'clock (L3-L1/1). Did I miss anything? Where...