-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
C
MEP002A Voltage Gauge Showing Voltage But Not Output at the plugs
Your going to have to spend some time troubleshooting via the TM. I had a similar problem where a winding lead on Transformer T2 (Located in Control Box) had vibrated loose and my voltage shot high...something like 160 VAC. Apparently due to vibration over time and the craft paper, used to...- Chainbreaker
- Post #25
- Forum: Generators
-
C
MEP002A Voltage Gauge Showing Voltage But Not Output at the plugs
Yes, A3 is the OEM transducer that the OEM Hz gauge connected to. If you are replacing the Hz gauge with an aftermarket Hz gauge with its own built in (internal) transducer you should follow the mfg's instructions for how to connect it up. You will no longer need the old A3 transducer that is...- Chainbreaker
- Post #19
- Forum: Generators
-
C
MEP002A Voltage Gauge Showing Voltage But Not Output at the plugs
Be aware that the Transducers on these units are very prone to failure. Even if it has one you probably have a 50/50 chance that it's any good, maybe less than that since someone already removed the Hz gauge. There are aftermarket Hz gauges that are an all-in-one unit with transducer built in...- Chainbreaker
- Post #16
- Forum: Generators
-
C
MEP002A Voltage Gauge Showing Voltage But Not Output at the plugs
Follow Guyfang's suggestions and as Light in the Dark said get a Kill-A-Watt meter. Just about any hardware store should have them in stock. Once you have power at the convenience outlets plug in the Kill-A-Watt meter (use a short extension cord) and set the meter to read Hertz. When reading...- Chainbreaker
- Post #10
- Forum: Generators