Search results

Also, on the battery size for your -003a... I'm not 100% sure but for some reason "Group 24" sticks in my mind as an alternative to the Mil Spec batteries that were used. Also, there are a lot of maintenance items covered in this thread in the -003a section.

BTW, the S1 "Master Switch" should shut it down when turned to "OFF". If it doesn't, you can pull on the "Emergency Shut Off Switch" to activate it which cuts power to Fuel Solenoid and I think to Fuel Pumps (The DC Control Circuit). Pushing in resets it when it has been used to shut off...

Its alive, its alive! Could be someone messed with the engine Speed Control knob if it was revving very high or there are linkage issues. If RPM's are way off you push in or out on the center button on knob to raise or lower RPM, or you can do fine adjustments by twisting the knob to the...

Looks ready for liftoff soon! I'm sure you know this but... make sure the batteries are fully charged & remember when starting to allow glow plugs & intake heaters a good 45 - 60 seconds preheat & most importantly hold start switch while cranking, and its running, until oil pressure builds and...

The lister apparently has several in stock. If you use "Make an Offer" when buying 2 sets its likely he might accept the suggested offer. I recently bought 2 myself & my offer was accepted. Good luck!

If you have confidence that you can bring this unit back to life and want to do the cylinders right, you should consider buying the complete top end Cylinder Gasket Kit. There are currently some listed on eBay. Try using a search something like: 110-2460, Onan Cylinder Gasket Kit. MEP002A ...