Search results

Howdy, Remember, the A3816 nitrile wellnut is tightened to 40 INCH-lbs. Just make sure you have the little rubber gasket ring in place when putting the canister filter assembly back together. NOTE: after changing both fuel filters.... turn unit on to prime & run for a long while to fill the...

Howdy, Don't try to re-invent the wheel. Start here in this thread. MEP-802A MEP-803A Filters and Parts | SteelSoldiers The 2nd post has quick links to all that you need to know. If you go with the well nuts, only use the proper nitrile rubber. Pay attention to tightening spec.

Howdy, I don't think you spoke with someone which knows what you are asking. The switch is service rated isolation switch. It really has nothing to do with Met-Ed Power. It is physically after the meter. So Met-Ed is out of it.

Howdy, You could replace that service breaker panel with a EZ-Connect Transfer Switch. I don't see tons of info on it, but it would accomplish what you need. http://www.generlink.com/ez-connect.html 200 Amp service panel transfer switch with service disconnect.

Howdy, https://www.steelsoldiers.com/threads/generator-connection-choices.163938/

Howdy, For your knowledge. US Standard electrical 1 Phase 120/240 It depends on the year, location, and who is talking. 110v is the same as 115v, which is the same as 120v, which is the same as 125v A standard duplex outlet is 120v outlet Larger items use both sides, and that is how you have...

Howdy, You have the correct fuse. With a meter handy, try it all out. note= your temp gauge looks fine. That's where it should be when running. It will never match a infrared spot temp.