Search results

M715 close up of which parts? The gooseneck coupler is pretty cool it literally attaches with 2 bolts. The gooseneck plate is on the back axle. It hangs over the frame by about 3/4 an inch on each side.. I used a few of the bolt holes from the ramps then drilled new holes for the rest of...

There are a lot. a good friend of mine has a true 5th wheel plate number he made it is really great. I will ask him if ok to post it on here for others to see how he did his. I have posted min in a new line or subject. We are all about sharing ideas ! **** that's what this community is for right!

Not today out of town but I will get them up by Monday at the latest!

931a2 travel trailer hauler So I know lots of times people have wanted to haul their 5th wheel with there 5 ton. I was the same and the whole set up was about 300.00. I used an Anderson coupler (gooseneck type connection) I went with it cause it is literally almost level at a 5th wheel plate...

If you like I can tell you how to do the set up. It cost maybe about 250-300 to do. I will look up the parts I used. And what not. Right now almost done with a gooseneck configuration. ... just net some last things to finish and send off to my mechanical engineering pal.

So since I last posted and know the post is old. I thought I would still share a pic of my 932a2 with my 5th wheel... took lots of research but got it figured outlok.

I will be very interested in how you set up the 5th wheel... one other thing have to remember is pinbox height ... a little is a big pain on rear axle.