Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Correct, hydraulic QD (Quick Disconnect) hold pressure. Also as ReoRider pointed out, it would be a good idea to have 1 male & 1 female on bulkhead to make sure hoses are connected properly rather than 2 females on bulkhead and 2 males on the trailer hoses.
The valves look different. The A3...
I am most familiar with the Pullmaster planetary winches. Most of them do have a small fitting- usually 1/8 or 1/4 inch for an optional external brake release in addition to the internal porting that gets the pressure from the two main hoses that run the winch motor. Pressurizing that external...
They are quite a bit different, but same principles would apply. They have a stacked gear pump with 3 sections, you would choose one (or maybe more) of the circuits and plumb your new control valve in. Since you have multiple functions, I think it would make the most sense if you went the route...
ReoRider- Wow- I read the thread on your install & I'm even more impressed.
As I thought about these posts, it seems like zebedee could also accomplish what he wants to do with a second 3 port selector valve installed right after the existing 3 port valve where existing line that currently...
ReoRider, that sure is a clean looking install on the front winch! How much pull is it rated for?
I agree that tapping in at the pump gives you a lot more room for ease of working & flexibility on where to install the new valve.
I have winch/5th wheel parts available now that we've...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!