Search results

I also just took it on a 30 minute test drive an it did a very good job on cooling the cab down even though I have a soft top. Tomorrow I will try testing and seeing the actual temerature coming out of the vents.

I finally finished! I took the dash apart and started making some vents for the a/c. I came up with an idea as to still have the defrost work. I took some plumbing parts which direct the "waste" a certain direction. I will try to describe it but it is in the picture. The air coming from the fan...

I will take pictures of the vent stuff. Not to worry I know you guys love pictures.:beer:

They charged $900 for the wiring and charging and they only charged me for 8 hours of work insstead of the real 20 hours they put into it. I guess it helps knowing them! The unit was 500 and a bracket for the compressor was 300. Plus probably around 100 in hardware and vents and 200 in hoses...

I got my truck back today and it blows ice cold air! Everything on the system is working just fine and the compressor cycles like it is supposed to. The guys that were wiring up the truck said it was a pain in the patooty to do. They had to make all new harnesses and new relays but they finally...

My unit is not complete yet. I have it charged up but the wiring is not completely done yet. I will take it to my friends shop where he will finish the wiring. He said he needs to make a small harness to connect to main power and make a bracket to hold a few relays for the system. After I get it...

From goldneagle on this forum. I dont think he has anymore though.

It was not easy finding them. They are made by a company called coyote international but they only sell wholesale. They referred me to a company called hoseline. They deal in emergency vehicle a/c's. If you look up coyote internationals website they have an online catalouge which corresponds...

I am using an MTVR kit for my truck. All I have done is retrofitted it in order to fit mine. What I plan on doing to the condensor is either putting an electric fan behind it or tapping into the air solenoid that controls the fan. I got the idea of mounting it on the hood by a member on here who...

I had to go get my truck from the shop in order to use it in a parade on the 3rd so while I had it I was able to take a few shots of the new wiring. The guys at the shop said they have about another 1-2 hours of work on it until its done. All the hoses installed and charged just waiting to...

Well yesterday I went to go check up on the progress on my trucks a/c wiring and refigerant charge. I was surprised that the wiring was about 90% done and they had just charged it. While I was over at their shop they used a jumper wire to engage the compressor clutch and it worked! The lines got...

Well yesterday I got all the a/c hoses made for my a/c and they were all the correct length so I installed them. Then today I took the truck down to a good friend of mine that owns a repair shop and he is going to flush the system, and charge it. He is also going to get the entire system wired...

Yesterday I recieved the bracket from artisan and it was just as described. I got the hardware today and I put it on. The only thing I had to change was the length of the return line for the power steering. I was going to take pictures but it was dark when I finished. Even revving it up to 2000...

"While I am at it, is the a specific NHC250 bracket that will work w/ the OE power steering pupmp? If so do you have a part number?" I wish but I have yet to find any that are available.

That looks like it would be an easy solution for air conditioning! I would say go for it!

I was hard at work today working on that a/c. Today I hooked up the wire controls to control the heater valve, floor/ defrost/ dashvents and the flap for recirculate even though I don't need it. I made a plate to keep the birds out but I still need to seal it. I also did all the dash air...

Thats what I was trying to do. At some point I want to put a turbo in and wanted to keep that option available.

YYYYYYEEEEEEEEEEAAAAAAAAA!!!!!!! I got my evaporator installed today. It just barely fit I mean BARELY! I still haven't put the dash back together because I need to do some air plumbing behind the dash. I think this was the hardest part of the entire project and hopefully nothing else will...

Well today I think I figured out the evap box problem. It was actually pretty easy. On the evap box I have, there is a fresh air intake port (i cant post any pics because Im using my ipad so look back on page 6 to see the pics) that stuck out about 2-3 inches. I thought that there is plenty of...

Now all you got to do is paint it so it will match the rest of the truck.