Search results

My second unit was a shop van & it was picked up on a goose neck trailer, loaded with a big forklift (inspect it before & after loading for damage), brought home & unloaded with a set of straps tied to a tree onto 6"x6"x8' PT timbers. We pulled over the 10" diameter tree when the shop frame got...

It is heavy & bulky, so when you go to pick it up, be prepared for that. Which one you won, I am not sure of, but good luck when you do get it.

Go to ARR website & you should find your info there. Which unit did you get, the workshop or the office unit? What shape was it in?

I found several brochures from the manufacturer of these units & how they were built. There was even a video from the start of the frame to completion which was quite interesting to the point that I bought two of them & probably would have bought more if transport could have been arranged...

How about this for the one in the pictures above. The second one sits on the LMTV awaiting tiedown!

Both of the units in the above pictures came from Iraq & had loads of very fine sand (almost a dust) in every crack & corner. Still, I could have never bought anything commercial like them for the price that I paid for these. GP sold a dozen or more of these units @ a location near me & most of...

The particular unit that we are discussing, I have two of & neither are insulated. They are manufactured with a 3/4" plywood sandwiched between two sheets of a fiberglass material. The frame is a heavy duty mil-spec aluminum cage. There are two other units that I have that are manufactured of a...

More info on the unit, the motor is dead due to the bearings, but Ereplacement has a new motor for $75.00.

Nothing like running your own thread on a subject. After finding no info on the exhaust vent system due to all the dirt & rust, the electrical feed was removed from the barrel assembly. This allowed me to see that a Sheetmetal collar was screwed around the vent on the inside. After that collar...

I bought a couple of these units last year from Gov Planet & put one on my M-1081 & the other one on the ground on PT timbers. The one on the ground is an excellent workshop for electrical & hobby R/C work. I hooked 120v shore power to it & everything but the ECU works due to no 3 phase power ...