Search results

Here is the axle tech grease seal # and link. I have loaned my hub tool out before if you want and we could talk about deposit. Yea Alaska is part of the U.S. and beautiful but to far to go looking for a tool. Utah is about my limit at my age. LOL...

Your knee deep in it now and the water is not over you head on this one I promise. I looked for replacement parts on the bay sight and they had some and even had small parts kits for what they call the seal anchor plunger. You might even get way using the old seal but myself I would replace. As...

Yes that inner grease seal can leak. No special tools to install a new one just a hammer and tap in straight. Setting the hub back up with be the hardest thing. If you lived in the US I could send you my cut off hub tool and socket so you can set the gear lash. You will need a shim kit most...

It's been years since I have had mine apart. https://www.axletech.com/at-admin/resources/Manuals/mm-0153.pdf

The gear oil from the outer hub would have to go through the all the CTIS high pressure seals to reach the inner grease seal. Could happen but we did have an OP that the diaphragm did leak and knocked off the wedge assembly adjuster seal. Could be the inner hub seal leak but it is not just a...

Don't know if this is the case but if the front brake diaphragm gets a hole in it will push grease out of the wedge assembly. Blows the seal. That plus as said maybe above stuck plunger too. You might get lucky and be able to get the drum off to look see and service. If the drum is to tight you...