Search results

I found the only problem was the new distorted nuts and something with enough power to get close to correct torque. Did mine with plenty of oil on threads and one inch air impact and big air line plus big compressor. Last ones done with Milwaukee M18 one inch drive # 4 power setting. That is...

I ordered some O rings and use the Accurite # that was stamped into my wheel. If you are having trouble getting the correct o ring to seal then something is wrong or you are doing it wrong. Bad edge on outer ring or O ring groove on wheel damage or not cleaned out right. O ring lube or tire soap...

When dealing with any other O rings I use a non-petroleum base O ring lube. As said tires, O rings and valve stem rubber Murry's tire soap in solid form not turned into a liquid. Also makes it easer when you have to change the tire in the future. Jtm Products Inc F1.0003 $28.26 8Lb Pail Murphys...

Murphy's tire soap on O ring and valve stem rubber is all I use. Never had a problem but I also use two non distorted nuts to pull the ring down even and tight. Then put on all distorted nuts tight and replace the two first nuts with distorted.