Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
From the cat service manual. The clutch starts to engage at approximately 775 rpm and is fully ingaged at approximately 1100rpm. The slection of a correct gear ratio must be made to pervent a long period of time in the 775 to 1100rpm range. If the truck does not accelerate ( pick up ground...
Right don't down shift and just let the truck coast to the stop then lift handle and place in you starting gear. I can start on a flat no load in 5 or 6th. Just when starting if the speed does not pickup in 3 seconds you chose to high of a gear smack it down one and try to get it going again...
Im not going to rake you over the coal's but yes this is a trans. you must drive.
Drive it more and you will get the feel for what gears you can wind out to 2100 and one you can shift at 1850. I only use 7 gears on mine from stop to start empty.
They like to be really warmed up to shift a little...