Search results

I found that when I took the oil screw out of the old style pack. Brake fluid came pouring out. I’m going to assume a rebuild?

I found 2 different master cylinders at my local Napa that “cross-references“ to the Part number you gave me

What if I got that master cylinder and just did my own remote Reservoir attach it to the far wall or something?

I’ll second the bad seal on the m/c do you know if the typical rebuild kit for the single circuit is the same as the dual circuit

Update. When I try to bleed with two people when soldier b is pushing In the pedal fluid is returning into the reservoir and spewing out the top of the cap. Any ideas?

Update i have one long style and one short style air pack on the truck I HAVE DUAL CIRCUIT BRAKES!!!!

If it fits it’s ships. 190 miles on the interstate like that

Can you reiterate?

Well kinda think of it I think I bled the air pack then went back to front. I don’t think there was a bleeder on the mc

I do not however, I will get some soon. Any good idea to keep water out of that cap so I can pressure wash the area of the air pack and such? It’s a pipeline truck and it’s caked everywhere.

to touch on this. There is a light for brake but not sure exactly what trips it. I havefound if the shifter for the trans is on a fence of a gear the truck willcrank but not actually crank more of a clunking sound. Almost like a neutral safety switch. Very weird.

Where could I find a rebuild kit? Considering the mc I have is not even close to what everyone else has. Are the parts interchangeable?

Pedal to the floor no resistance whatsoever. If a partner holds the pedal to the floor and I crack a bleeder I do get some pressure but not a jet like it should be. It’s more of a little trickle. Zero brakes. Absolutely no stopping ability. Not even the parking brake works. That’s a completely...

What I’ll say is, I only see one air pack. I’ve done extensive research and can say I’m pretty familiar with the brake system. When I flipped the trap door open and saw a plastic cap on a plastic reservoir I was complete thrown off. i think it has the newer master cylinder but not the complete...

I recently purchased a 1988 m35a2 deuce and once I got to the truck I needed to bleed the brakes. I flip the door up and found the mc. Now the weird part, it’s a plastic reservoir directly where the cast one should be. Added fluid began bleeding starting with the Mc and working from further to...