Search results

It's all Good, I've had dinner and stopped kicking my self.[thumbzup] I had another 10Kw AC box, Just swapped them out. Now I have a spare 5Kw box for the future Gen Build If needed? I will learn from this mistake. Now I have a nice 5Kw Gen that needs some loving.

I want to Thank jamawieb for His wisdom, The Idiot award for today go's to Ding, Ding, Ding "MYSELF" I got myself into trouble again assuming my 10Kw Gen was complete with only 40 hours on It and had the correct 10Kw AC box. I got to thinking about what jamawieb said about the CVT1's being...

@Guyfang, I assumed It might be 400Hz. That word also gets me into a lot of trouble. I posted In the breaker thread. @Guyfang, The other Breaker CD3-Z75-5 is a 6 Post/Lug. The 60Hz breaker has 12 I believe. I think this is the other difference.

What happen to the old pages? I liked the other. I am going to remove the breaker that Is tripping to see If there's any part #'s on It. I will update when I do.

@jamawieb, I will and I would have never found that by the way. Question for you that you might have an answer. Can I use a 5Kw AC box on a 10 Kw by just replacing the Breaker?

To Guyfang, Triple Jim, Jamawieb. Update: I Won. I replaced the A1 and S1 plus checked the wire's to A1, S1, Rectifier Board, Voltage Regulator. The wiring was right. The Control panel Is now working again and did not fry my Resistor on the Bridge Rectifier Board. "Thank God" It had to be the S1...

@jamawieb I will be working on the Gen tomorrow. I printed your suggestion and will check on that. Thanks

@Guyfang I was Busy yesterday and today Is raining cat's and dog's so I will probably get to It tomorrow. I will replace the S-1 and double check the VR wires & Others. I do see one wire someone messed with that I am going to check. Thanks

Triple Jim, Whatever It Is I know its in the Control Box. I just finished reading for the past 5 hours and nothing is jumping out at me. I replaced the Bridge Rectifier Board before I closed up garage tonight and next I am going to change the start switch and try again. Cross fingers, will see...

Hello to my fellow Steel Soldiers, I am jumping on this past post with similar problem. Short story, I needed to sell a Mep-003a 10Kw to a friend today for his portable logging mill. I knew it would run but not produce power, I knew that It was probably the Voltage Regulator and it did not have...