• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. G

    Cold start c7 issues

    Upon review of the schematic I can verify that the fuel separator bowl heater is on CB49 and is simply ignition switched so it's on all the time with the ignition. Nothing to do with cold start function.
  2. G

    Cold start c7 issues

    There is a heated fuel bowl on the fuel/water separator element...... someone, somewhere is probably confused thinking that is involved in the cold start. I can tell you without a doubt it is not used by the CAT ECM (at least not directly). I just replaced my entire engine harness from the ECM...
  3. G

    Cold start c7 issues

    No the A1R and A1P2 still use Ether assist and the solenoid/cylinder is in the same location. I just installed a bottle on the existing solenoid. The difference is that the later C7 uses a single Ether nozzle at the intake manifold and the solenoid is a different part number.
  4. G

    Cold start c7 issues

    Can confirm that cold mode status flag is always set on any start below 158F. The engine rolls coal a bit in this mode. I've never had my Ether engage that I'm aware of but I can't recall at the moment if I had the cylinder installed last winter or not. My truck came from Texas with no...
108,579members
163,837threads
2,305,093posts
954online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks