Search results

The air line to tank runs through the firewall, under interior carpet to the very back of the spare tire where the tank is mounted. It's cool when I flip the compressor on I can hear the tank filling. Sent from my SM-G955U using Tapatalk

Cool! I will post up the diagram of my bracket if I remember today. All I can tell you guys is it's been the MOST useful addition to any vehicle I've ever made. I am a groundskeeper and use it occasionally at work, offroad, when my sons mother was having tire issues, running an impact to repair...

It's been working GREAT! 28 seconds to fill the tires from 15 to 35 psi. I'm still waiting on the air filter and crank case vent but for now its operational. I put a 12v switched fuse panel on the fender. It is fed via a relay controlled by the injection pump 12v solenoid wire. It has 10 fused...

I did have to use a half inch shorter belt due to the new alt pulley being smaller. The power steering booster hose had to be bent a little out of the way as did the brake lines but as you can see it was minimal. Sent from my SM-G955U using Tapatalk

Finally got it finished. I have a drawing with dimensions too. I'll post it later. I'm still waiting on some parts to come in, like the inlet filter and crankcase vent, air manifold to house the pressure switch etc. 18 feet of 3/8 hose runs under the interior carpet, hidden and connects to a 5...

So only have a couple hours into it so far. It's all 1 solid plate of 1/4 x 5 flat bar with a few simple cuts and bends. I'll post up the measurements and angles when its finished, so others can make one. I'll try and finish it Thursday. Sent from my SM-G955U using Tapatalk

It's in excellent condition, very lightly used. With how infrequent I'll be using it I dont expect oil usage to be an issue. I'm putting a drain cock at the little air tank to drain any potential contaminates out. I've also coated the inside of the tank with red primer to rust proof it for life...

I have a 3 gallon that fits on the passenger side fender inside. Gonna keep it simple. No driers or filters. Plugged the oiler hole in the York to reduce the oil discharge and will be also running a crankcase vent on it. Mods If this belongs in the modding section......please do. Thanks Sent...

Well....1 pic anyway. Gonna mount this York 210 to the CUCV. I plan to put AC in this truck eventually. Which will tie up passenger side. So drivers side looks like the best place to do a York mount. This will be for running an impact wrench or airing up tires offroad. Nothing crazy. I have...