Search results

No the glow plug and water in fuel light are separate from the cluster harness. Everything on that cluster photo gets signal from one large plug. You are welcome. I was new to this at one point as well. Glad I could help.

OK if you look back at the photo posted previously of the back of your instrument cluster. At the bottom right of the photo you will see Gen 1 and Gen 2. These are where the bulb holders go. The signal for them is carried through the printed circuit board from the main plug where all the traces...

As I stated the Gen lights are in the same harness that plugs into the back of the instrument cluster. You said your cluster harness was intact. You stated you can not find any cut wires so what leads you to believe your wires for you're Gen lights are missing?

This is a photo of what each socket on the pcb/cluster is for. Borrowed from the thread below. It's a good read. https://www.steelsoldiers.com/threads/cucv-instrument-cluster-decoded.46054/

Cucv fuse box layout. https://www.steelsoldiers.com/threads/cucv-fuse-box-layout.132309/

OK and looking back at your photos it looks like from what I can see of one Alternator that the wires all look to be in there. You could just have blown bulbs, fuse, or a bad pcb on the back of the cluster. Also see if any of your fusible links are bulged out or broken. Any of these things can...

In my experience the needle should be in the green at all times. If it gets to the yellow you either have week or no charging. Question though your Gen lights are part of your instrument cluster harness. Has the cluster harness been removed?