Search results

Your looking good Fastbrass! The drop in freq is normal, like others have said. If you have a sensitive load, then follow Jamawieb's instructions. Most loads are not affected by the little bit of freq drop. But it might be interesting to see if you can improve it!

Now this is just me, an old nag. But take the time to look for loose wires, or places that might look like someone had un hooked stuff, to compare the wires with the schematic. Take off the top of the set, front and rear, and start looking. You get a better feel for your set, and you just might...

You need a K8.

Hook up the wires right on the relays. Start the set. Flip up S7. Try and turn on S5. Will it close K1? If K1 closes, what idiot light comes on?

www.steelsoldiers.com/showthread.php?175591-MEP-803A-All-the-TM-s-you-need Its in the TM forum, Generator section, top of the page, page #3 Download it all. The long black box has a total of 4 TM's in it. You just cant see them. hold your pointer over the black places, and the title will come up.

Have you downloaded the TM from the Forum here? All the TM's are there, and the re is a package of schematics in it extra. They are "better" then most of the normal ones in the TM, but only maybe. If I can do this, you can do this!!!!!!!!!!!!!!!! I would write more, but got to take my...

I made this list myself. I have gone back to working on it and triple checking that I have it all and its right. Sooner or later I will get it done and put it in the Forum. P6-35 means P6 plug. 30 is the pin number in the plug. P6 has a mate, the other side of the connection. Its J6. P for...

Yes, momentary signal. The S5 tells the K1 to close. Then the S5 springs back to the middle position. The K1 stays closed until the S5 is pushed down, telling K1 to open, OR a saftey relay, tells the K1 to open. S5 Switch From...

Later today I will post something to help.