Search results

Roger! Get another.

Try to adjust it to 3 VAC and then try starting it.

The best way to reinstall it is to screw it in till it bottoms out, then turn it out 3/4 turn, (I do it 1 compleat turn because I have also joined the multitude of folks who ground one off). Then, lock it down lightly. Do not rehook the wires. Have someone else turn the gen set over with the...

Right off the top of my head, with the MPU in your hand, the Ohm mesurment should be between 900-1200 Ohms. Easyest way to see if its still good. Take your time reinstalling it. Or you too will join the multitude of folks who have ground one off.

Before fooling with the A6, (actuator) try testing, troubleshooting. Most A6's get changed for no reason. As stated above, start with the MPU. Then you have a good idea what to do. It can not hurt to try and fix the K2, if its even bad. wires first, then ground. If it still acts funny, take it...

Ray, try looking at the wires hooked to the S1, and make sure they are hooked up right, and tight. Nect, mesure from S1-7, to ground when sturning the S1 to start. What you want to do is hit a spot where the starter dosent start, just clicks. Thats when you want to see if the 24 VDC is at pin...