Search results

Look at your oil. Is it thin? Smell like fuel? If a jug is getting too much fuel, its going to leak some into the oil.

Now that I got the pump pins correctly in the rack, it appears the cylinders running equal and not so hot. (At least with a laser temp gun. Sometimes my HZ guage is working and sometimes not. When it is running smooth, the guage is around the 62 HZ, but still no control with the knob. (If you...

Or better known as L5.

Look on the gen set door. The schematic is there. L5 is easier to write than Fuel Shut Off Solenoid.

Make a film of the L5 when someone else turns the S1 to the off position.

Or a sticky linkage. The linkage should move freely. The linkage should move freely where the shouldered screw goes through it.

Hook the MM up to K1-X & K1-Y. Close S5. Is the DS7 lit? Do you get 24 VDC. If DS7 is not lit and you get 24 volts, the K1 needs to be opened up and cleaned up, so it functions right. You need to concentrate on one problem, and fix it. Jumping around brings you nothing.

Please stop. Take a picture of the fuel cutoff solenoid when the set is running. Because from the picture above, something look "fishy". So start the set. Take the picture. shut it down. Also, before going any farther, look at the attachment.