• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. Guyfang

    Mep 003a fuel pump connectors

    No one can make a wonderful looking automobile, so complicated, as Brits. If you cant fix it yourself, rob a bank.
  2. Guyfang

    Mep 003a fuel pump connectors

    RTB. Its all in the TM, just need to read it.
  3. Guyfang

    Mep 003a fuel pump connectors

    Use that crap at your own risk. It flat out is not good for these engines. When you crack the fuel line to the IP here, right at the IP, turn on the E2 and E§, do you get fuel out? If yes, and the engine will not start, (And sometimes you have to do this a while) then read how to time the IP...
  4. Guyfang

    Mep 003a fuel pump connectors

    The army puts serrated washers on the fuel pump mounting bolts, to ensure GOOD grounding. Lots of folks feel its not needed. I kept a box of 100 each washers, and replaced, or installed them when ever I saw them missing, and I had time to do it.
  5. Guyfang

    Mep 003a fuel pump connectors

    If you need to know the exactly how long a hose piece is supposed to be, its in the 24-P
  6. Guyfang

    Mep 003a fuel pump connectors

    OPEN to read comment
  7. Guyfang

    Mep 003a fuel pump connectors

    If you only knew how much it hurts to laugh...........................
  8. Guyfang

    Mep 003a fuel pump connectors

    You all have been great! Great work. Will just add, as I need to get back in bed, you can buy a cheap "drop in pump" and hook it up in the E1 position. That gives you both of the other ones. Will just add, as I need to get back in bed. My appendix burst, and am at last home again. Will try...
  9. Guyfang

    Mep 003a fuel pump connectors

    Evvy, this is a very common failure, even when the pumps were new. Most are older then St. Peter now, and its fairly common that the EMI filter goes bad. The pump itself is cast iron. Few pumps fail. It happens, but mostly if they stop, its plugged up or EMI filters.
  10. Guyfang

    Mep 003a fuel pump connectors

    Open to see comment
  11. Guyfang

    Mep 003a fuel pump connectors

    Now, lets talk MEP-002A and MEP-003A fuel pumps. There are two fuel supply 24 VDC electric pumps on your gen set. There is a third on the set, for using Aux fuel position when in the S1 (start switch) position, "Run, Aux". You need to be in the normal run positin to make your two pumps run. Why...
  12. Guyfang

    Mep 003a fuel pump connectors

    You posted this in another thread. Something you are not supposed to do, post the same problem in several threads. Below is my answer. I have a MEP-003a with pencil style emi filters on electrical feed to OEM fuel PUMPS 24volt. My problem is that fuel pumps stopped working and I would like...
  13. Guyfang

    Mep 003a fuel pump connectors

    I posted in another thread, where you asked this question. Did you read that post? I did not mean Evvy. I meant Brother.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks